There are few methods for appling paints like brush, rooler, conventional spray and airless spray which are to be selected as per requirement.
You should not apply paint if temperature falls bellow 10 C or relative humidity rises above 90% or during rain, fog or mist.
All the two component coating system requires very specific time to achieve full cure properties. Any contamination during this specific period by foreign bodies wills failure of coating.
Brushes and spray equipment are to be clean with thinner to avoid clogging damages, hardeng of the same.
The liquid should not thin by more than 10% of the volume.
Close lid required quantity that can be consumed within the pot life of coating.
For the proper mixing stir the contents regularly. Mix the both contents as per recommended ratio. Proper stringing is very essential. Stir the contents thoroughly till it becomes homogeneous then allow the mixture for maturation period as per requirement.
Apply uniformly composition and in even passes.
Keep away from heat and store under shade.